The Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2 are the same sensors that come with the TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire Sensors # TST-507-FT-6-C, which is the same as your TST-507 system. These are only sold in packs of 2, so you would need 2 packs. view full answer...
You will need the Bearing Kit # BK2-100 for each of your hubs on your 2019 Grand Design Imagine XLS 18RBE travel trailer.
With doing all 4 hubs it will be much easier with a Seal Puller # PTW1219 and Installation Set # PTW83020 to replace all the components.
I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 as it is specifically formulated to work well in hot and cold climates. view full answer...
I have solutions for you, but there won't be any systems that are compatible to allow you to all use the same monitor. For the camera system, I recommend using the Furrion # FCE48TASL-05 (5" monitor). This Furrion system comes with the rear backup camera and 2 side marker light cameras to give you a full view of your surroundings on all sides when maneuvering your 2019 Grand Design Reflection; this system is our most popular and well-reviewed system, and the one I recommend strongly. You... view full answer...
Your next step in trying to improve the ride quality on your 2021 Grand Design Reflection 303RLS 5th Wheel is to get a Rubber Equalizer. It all depends on your wheelbase when determining which kit to get. MORryde makes a great product that will really help. We have kits for 33" # MR87ZR, 35" # MR27ZR, 42" w 10" equalizer # MR54AR and 42" wheelbase with 14-3/4" equalizer # MR34AR.
This is better than replacing the components you already spend time and money putting on. view full answer...
The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD89ZR will be a better choice then The Classic Accessories PermaPRO Deluxe Extra Tall 5th Wheel Cover or Toy Hauler Cover # CA80-299-203101-RT. The Adco cover works best for long-term storage in all climates and high winds.
The top panel of the cover is constructed of a Olefin HD fabric which blocks harmful UV rays that can cause cracking and fading. The side panels are constructed of a non-abrasive, triple-layer... view full answer...
I have a solution for you but I am sorry the Automatic Level Control system on your 2017 Yukon Denali can not be used with a weight distribution system. The two components work in opposition of each other and it will diminish your ride quality. You will want to use an electronic trailer sway control system like the Tuson Asymmetric Sway Control - 1 to 4 Axles item # 335TSC-1000. The electronic sway control system helps correct sway in trailers without weight distribution. It monitors trailer... view full answer...
Both the TruRyde Seals GS-2250DL and RG06-070 have an inner diameter of 2.250 inches and an outer diameter of 3.376 inches and works with E-Z Lube End Units.
They are the same except one comes with 2 pieces when the other comes with 1.
I attached a review video link below. view full answer...
For your 2021 Grand Design Reflection 28BH 5th wheel you will need the following components.
Kodiak Disc Brake Kit # K2HR526D Qty 2
Inner Bearing # 25580 Qty 4
Outer Bearing # 15123 Qty 4
Grease Seal # GS-2125DL(2.125" inner diameter) or # GS-2250DL(2.250 inner diameter) Qty 4
Kodiak Hydraulic Brake Line Kit # HS496-252
Hydrastar Vented Marine Electric Over Hydraulic Actuator # HS481-8067
You will need to confirm the size of the grease seal used on your axle. If you can provide me with... view full answer...
In order to use the # LC696740 Lippert Road Armor cushioned equalizer kit, you'll want to go with longer shackle links, assuming you're currently running 2-1/4 inch links. Going with a 3-1/8 inch link will make up that width difference.
Lippert recommends the # LC52SV AP Wet Bolt/Shackle link kit for use with the Road Armor equalizer. The MORyde # MR98ZR is designed for suspensions that use their Correct Track suspension system.
The Lippert Never fail kit has been discontinued.
Another... view full answer...
Yes, the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer item # MR72AR is universal and will fit your 2022 Grand Design Reflection 150 295rl so long as your landing gear is between 58"-80" wide. view full answer...
Sure thing!
For your 2017 Grand Design Momentum 395M, I recommend taking a look at the:
- Electric Trailer Brake Kit # AKEBRK-6.
This kit includes both the left and the right hand side assemblies, will fit most standard hu and drum assemblies, and will work with axles rated 5,200 lbs, 6,000 lbs, and 7,000 lbs.
Or
Even easier, you could also use the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-458 for the left side, and # 23-459 for the right side.
This braking assembly... view full answer...
To get your 2021 Grand Design Momentum 349M 5th Wheel toy hauler converted over to disc brakes, it will require a few parts. This is a pretty common upgrade for toy haulers though, so we definitely have everything you need. With that said, I have all the part numbers as well as quantities for everything you will need below.
Qty.1 - HydraStar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi # CAR-HBA16-2
Qty.2 - Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw... view full answer...
You are still going to need the monitors that come with both the Furrion Vision S # FOS43TASF and the TireMinder i10 TPMS # TM89FR.
The pre-wire for your trailer just means the wiring for a Furrion camera system is already ran so you'd just have to plug the camera in and you'd be set.
Also, the K-Source Snap & Zap Custom Towing Mirrors # KS80930 will not interfere with the camera functionality on your mirrors because there is a cut out at the bottom of the mirrors for just this, and they... view full answer...
For your 2022 Grand Design Reflection has overslung axle which means your springs sit over your axle, then you can use the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS26MV.
If you have underslung axles meaning your springs sit under your axles, then you'd need the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS33HR instead.
These springs will work with 5,000 to 8,000 lbs, tandem axles, and has a simple no drill install. view full answer...
Thanks for the picture! I have a great set of disc brakes for your 2019 Grand Design Momentum Toy Hauler. You are going to need a couple of other parts too to convert your trailer over to a disc brake set up.
I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs item # K2HR79. This kit will fit your 2019 Grand Design Momentum Toy Hauler's 7,000 lbs axles and 8 on 6-1/2" bolt pattern.
You're going to need an actuator. The HydraStar Vented Marine Electric... view full answer...
We can accommodate the electric trailer brakes for an 8,000 lb axle with the Electric Trailer Brake Kit # AKEBRK-8, which mount with the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 8,000 lbs to 9,000 lbs # BRKH122508.
That said, the largest axles we offer are 7,000 lb axles, and the largest load capacity we have for what should be 235/80-16 tires on your trailer are load range G. A new axle will likely have to be sourced by via fabricator or local installer or RV dealer.... view full answer...
We do carry a couple of replacement control boxes like the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR which will work with the Seismic series recliner and sofas, and the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 which will work with Momentum series recliners and sofas.
If you have one or the other series of recliners mentioned above, this replacement will work great for you. If you do not, then unfortunately... view full answer...
The Kodiak Disc Brake Kit # K2HR8D11E58 is designed to fit 8,000 lb axles with a 4-bolt brake flange. Although the bearings will fit, your 2020 Grand Design Momentum 397TH has 7k axles with a 5-bolt brake flange so you will want a different disc brake kit. I recommend verifying this information to be sure.
Since you have a triple axle trailer, I recommend the Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers # HYD54FR. This comes with the disc brakes, the brake lines, and the... view full answer...
Since your 2019 Grand Design Reflection 303RLS has 5,200 lbs Dexter axles you will most likely have 25-1/4" long double eyed leaf springs. You will want to measure to confirm but if this is what your 5th wheel currently has you will want the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long item # e34SR as spares.
The MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps item # MR46ZR will work well with these leaf springs but you will again... view full answer...
The Blue Ox Track Pro Weight Distribution Shank for 2-1/2" Hitches # BLU26FR that you referenced is for the Blue Ox Track Pro. Since you have the Blue Ox SwayPro system, you will want to go with Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches # BXW4028 view full answer...
Go To Results